电阻式触控控制晶片
如需要将PenMount控制元件设计于你的系统上,这里有提供解决方案。如需要电路图或开发相关文件,请与我们联络。
PenMount 6010 觸控式螢幕控制晶片組 (RoHS Compliant)
PenMount 6010是一款擁有高效能的觸控控制器,內含隨插即用的功能符合最新作業系統的趨勢。是採用USB及RS-232界面的高性能觸控式螢幕控制晶。PenMount 6010內含12-bit A/D轉換器,適合高密度電路設計。
Touch Screen | 4, 5 , 8-wire |
---|---|
Package | 28-pin QFN |
Communications | RS-232 19200 / 9600 baud rate |
Feature |
|
Sample Rate | 160 points per second (minimal) |
Resolution | 2048×2048 for 6010.1.0.0 4096×4096 for 6010.1.2.0 |
Resistance Range | 50~1.3K ohm |
Operating Voltage | +3.3V ~ +5V DC ± 5% |
Operating Temperature | -40 ℃ to +85 ℃ |
Storage Temperature | -65 ℃ to +150 ℃ |
Power Consumption | Standby Mode : 13.4 mA ; Active Mode : 24.6 mA |
PM6010 Controller Driver Software
PenMount 6000 觸控式螢幕控制晶片組 (RoHS Compliant)
PenMount 6000是一款擁有高效能的觸控控制器,內含隨插即用的功能符合最新作業系統的趨勢。是採用USB及RS-232界面的高性能觸控式螢幕控制晶。PenMount 6000內含10-bit A/D轉換器,適合高密度電路設計。
Touch Screen | 4, 5 , 8-wire |
---|---|
Package | 28-pin QFN |
Communications | RS-232 19200 / 9600 baud rate |
Feature |
|
Sample Rate | 160 points per second (minimal) |
Resolution | 2048*2048 |
Resistance Range | 50~1.3K ohm |
Operating Voltage | +3.3V ~ +5V DC ± 5% |
Operating Temperature | -40 ℃ to +85 ℃ |
Storage Temperature | -65 ℃ to +150 ℃ |
Power Consumption | Standby Mode : 13.4 mA ; Active Mode : 24.6 mA |
PM6000 Controller Driver Software
PenMount 9000 觸控螢幕控制器晶片組 (RoHS Compliant)
PenMount 9000是採用RS-232界面的高性能觸控式螢幕控制晶片組,內含A/D轉換器符合需要自製電路板的需求。除此之外這些個別控制單元,適合大型觸控式面板的區域補償。PenMount 9000支援4線、8線、5線觸控式面板使用。
Touch Screen | 4, 5 & 8 wire |
---|---|
Package | 32-pin TQFP |
Communications | RS-232 interface |
Nature | 8-bit RISC microprocessor with built-in functions including 10-bit ADC, UART, Timer, Counter, Comparator, Watchdog, Memory, etc. |
Operating Voltage | DC +5V |
Power Consumption (at 4 MHz, 3V) | Active: 3.6 mA / Idle Mode: 1.0mA |
Operating Temperature | -40 ℃ to +85 ℃ |
Storage Temperature | -65 ℃ to +150 ℃ |
Please refet to the data sheet describing ATmega8L-8AU from ATMEL for more detail.
PM9000 Controller Driver Software
DOS, Windows 3.1/ NT4.0/ 95/ 98/ Me/ 2000/ XP/ 2003/ 2008/ Vista/ 7/ 8, Linux (up to kernel 2.6), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5, Windows CE 4.2/ 5.0/ 6.0/ 7.0 (for X86, Armv4, Armv4i platform); Solaris 10
PenMount M1電阻式觸控晶片 (RoHS Compliant)
PenMount M1 是PenMount為工業電腦特殊應用所開發的觸控控制器,支援USB介面,M1內含 10-bit A/D 轉換器,適合高密度電路設計,可搭配多達12區域的電阻式觸控面板設計,實現PenMount為「安全」及「確認」所設計的特別功能。
Support | Able to support Multi-Finger Resistive touch screen with 1~12 zones |
---|---|
Interface | USB Model : USB Full Speed |
Resolution | 1024 x 1024 |
Cursor Accuracy | < 1% (Active Area Diagonal of touch screen. After calibrated with PenMount Advanced Calibration) |
Sample Rate | 167 points/sec (1 finger touch) |
Resistance Range | 50 ~ 1.5 K ohm for each zone |
Touch Response Time | 30ms |
Power Requirements | Voltage: +5V DC ± 5% (50mV peak to peak max ripple) |
Storage Temperature | -40 ℃ to +85 ℃ |
Operating Temperature | -20 ℃ to +70 ℃ |
PenMount M1 Driver and Software
- Supports Microsoft Windows XP / Vista / 7
- Provides single touch gesture recognition on Microsoft Windows systems
- Software library is available by request for developing applications based on Microsoft Windows 2000 and later operating systems.
- Available software utilities :
- Advanced calibration
- Right mouse button simulation
- Multi-monitor setting
- Screen rotation detection
- Draw program