電阻式Combo控制板
PenMount Combo控制板(RS-232 & USB)一共有三款,這三款PenMount Combo控制板均可以自動偵測USB & RS-232介面,而且全部支援4、5、8線式電阻式觸控螢幕;PenMount提供的驅動程式更能自動偵測安裝適合的驅動程式:
- PM6500
- PM6200
- PM6202
這三款PenMount觸控控制板均使用包含10-bit A/D的全功能PM6000觸控控制IC,您也可以選擇另外設計12-bit ADC。在控制板上有兩個連接器,一個連接4、5、8線式電阻式觸控螢幕,另一個連接USB & RS-232介面。
PM6200D5 Control Board
Touch Screen | For 5-wire analog resistive type |
---|---|
Interface | USB: Full speed 12MHz bps |
Touch Screen Controller | PenMount 6000 controller IC |
Resolution | 2048X2048 |
Cursor Accuracy | < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) |
Diagnostic | LED on board |
Resistance Range | 50 ~ 1.3K ohm |
Operating Voltage | +5V DC for USB |
Electro Static Discharge (ESD) | Air Discharge 15KV |
Storage Temperature | -40 ℃ ~ 85 ℃ |
Operating Temperature | -20 ℃ ~ 70 ℃ |
Power Consumption | Standby Mode : 15.4 mA ; Active Mode : 24.2 mA (VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm) Note. Actual current will be different by touch panel’s resistance. |
MTBF | 30℃ — 3689930.7 Hours |
PM6200 board Driver Software
RS232 interface:DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
USB interface:Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux OS (Kernel 2.6 and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)
PM6200D8 Control Board
Touch Screen | For 4-, 8-wire analog resistive type |
---|---|
Interface | USB: Full speed 12MHz bps |
Touch Screen Controller | PenMount 6000 controller IC |
Resolution | 2048X2048 |
Cursor Accuracy | < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) |
Diagnostic | LED on board |
Resistance Range | 50 ~ 1.3K ohm |
Operating Voltage | +5V DC for USB |
Electro Static Discharge (ESD) | Air Discharge 15KV |
Storage Temperature | -40 ℃ ~ 85 ℃ |
Operating Temperature | -20 ℃ ~ 70 ℃ |
Power Consumption | Standby Mode : 15.4 mA ; Active Mode : 24.2 mA (VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm) Note. Actual current will be different by touch panel’s resistance. |
MTBF | 30℃ — 3689930.7 Hours |
PM6200 board Driver Software
RS232 interface:DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
USB interface:Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux OS (Kernel 2.6 and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)
PM6202C Control Board
Touch Screen | For 4- or 5-wire analog resistive touch screens |
---|---|
Interface | USB:Full speed 12MHz bps |
Touch Screen Controller | PenMount 6010 controller IC |
Resolution | 4096×4096 |
Dimension Holes | (L)70.0mm x (W)20.0mm x (H)10.3mm (max), two 3.0 φ screw |
Connector | ZIF connector or Wafer connector on board for touch screen |
Diagnostic | LED on board |
Cursor Accuracy | < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) |
Resistance Range | 30 ~ 1.3K ohm |
Operating Voltage | +5V DC |
Power Consumption | Standby Mode : 13.8 mA ; Active Mode : 21.8 mA ( VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm ) Note. Actual current will be different by touch panel’s resistance. |
Electro Static Discharge (ESD) | Air Discharge 15KV , Contact Discharge 8KV |
Storage Temperature | -40 ℃ ~ 85 ℃ |
Operating Temperature | -20 ℃ ~ 70 ℃ |
PM6202 board Driver Software
RS232 interface:DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
USB interface:Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux OS (Kernel 2.6 and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)
PM6500C Control Board
Touch Screen | For 4, 8-wire or 5-wire analog resistive type |
---|---|
Interface | USB:Full speed 12Mbps RS-232: 19200 baud rate, N81 PnP mode |
Touch Screen Controller | PenMount 6010 controller IC |
Resolution | 4096×4096 |
Size | 60×26 mm, two 3φ screw holes |
Cursor accuracy | < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) |
Resistance Range | 50~1.3K ohm |
Diagnostic | LED |
Operating Voltage | +5V DC |
Storage Temperature | -40 ℃~ 85 ℃ |
Operating Temperature | -20℃ ~ 70 ℃ |
Power Consumption | Standby Mode : 14.4 mA ; Active Mode : 22.5 mA (VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm) Note. Actual current will be different by touch panel’s resistance. |
PM6500 board Driver Software
RS232 interface:DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
USB interface:Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux OS (Kernel 2.6 and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)
PM6200F5 Control Board
Touch Screen | For 5-wire analog resistive type |
---|---|
Interface | USB: Full speed 12MHz bps |
Touch Screen Controller | PenMount 6010 controller IC |
Resolution | 4096×4096 |
Cursor Accuracy | < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) |
Diagnostic | LED on board |
Resistance Range | 50 ~ 1.3K ohm |
Operating Voltage | +5V DC for USB |
Electro Static Discharge (ESD) | Air Discharge 15KV |
Storage Temperature | -40 ℃ ~ 85 ℃ |
Operating Temperature | -20 ℃ ~ 70 ℃ |
Power Consumption | Standby Mode : 15.4 mA ; Active Mode : 24.2 mA (VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm) Note. Actual current will be different by touch panel’s resistance. |
MTBF | 30℃ — 3689930.7 Hours |
PM6200 board Driver Software
RS232 interface:DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
USB interface:Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux OS (Kernel 2.6 and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)
PM6200F8 Control Board
Touch Screen | For 4-, 8-wire analog resistive type |
---|---|
Interface | USB: Full speed 12MHz bps |
Touch Screen Controller | PenMount 6010 controller IC |
Resolution | 4096×4096 |
Cursor Accuracy | < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) |
Diagnostic | LED on board |
Resistance Range | 50 ~ 1.3K ohm |
Operating Voltage | +5V DC for USB |
Electro Static Discharge (ESD) | Air Discharge 15KV |
Storage Temperature | -40 ℃ ~ 85 ℃ |
Operating Temperature | -20 ℃ ~ 70 ℃ |
Power Consumption | Standby Mode : 15.4 mA ; Active Mode : 24.2 mA (VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm) Note. Actual current will be different by touch panel’s resistance. |
MTBF | 30℃ — 3689930.7 Hours |
PM6200 board Driver Software
RS232 interface:DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
USB interface:Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux OS (Kernel 2.6 and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)