Resistive Combo Control Board
There are 3 PenMount Combo control boards (RS-232 & USB). These 3 PenMount Combo control boards can auto-detect USB & RS-232 interfaces and can support 4, 8, and 5 wire resistive touch panels. PenMount provided drivers can auto-detect and install the most suitable drivers:
- PM6500
- PM6200
- PM6202
These three PenMount control boards utilize full function PM 6000 controller ICs with 10-bit A/D. You can choose a separate 12-bit ADC design. The control boards possesses two connectors with one connecting to 4, 8, and 5 wire resistive touch panels ant the other connection to USB and RS-232 interfaces.
PM6200D5 Control Board
| Touch Screen | For 5-wire analog resistive type |
|---|---|
| Interface | USB: Full speed 12MHz bps |
| Touch Screen Controller | PenMount 6000 controller IC |
| Resolution | 2048X2048 |
| Cursor Accuracy | < 1% (Active Area Diagonal of touch screen with PenMount Advanced calibration utility support) |
| Diagnostic | LED on board |
| Resistance Range | 50 ~ 1.3K ohm |
| Operating Voltage | +5V DC for USB |
| Electro Static Discharge (ESD) | Air Discharge 15KV |
| Storage Temperature | -40 ℃ ~ 85 ℃ |
| Operating Temperature | -20 ℃ ~ 70 ℃ |
| Power Consumption | Standby Mode : 15.4 mA ; Active Mode : 24.2 mA (VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel Resistance: 660 ohm) Note. Actual current will be different by touch panel’s resistance. |
| MTBF | 30℃ — 3689930.7 Hours |
PM6200 board Driver Software
RS232 interface：DOS, Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux (Kernel 2.6 and X-Window mode), QNX 6.2/ 6.3.2/ 6.4.1/ 6.5
USB interface：Windows 2000/ XP/ XPE/ 2003/ 2008/ Vista/ 7/ 8/10/11, WinCE 4.2/ 5.0/ 6.0/ 7.0, Linux OS (Kernel 2.6 and X-Window mode), QNX 6.4.1/ 6.5 (Inbox support)
